Shop

Showing 28–36 of 119 results

  • HRT 30mm Medium Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Medium: 1.075″ (27.3mm).

    Read more
    $109.00
    Quick View
  • HRT 30mm S-Low 7075 Aluminum

    0 out of 5
    HRT SL (Super-Low) Series Rings, precisely machined from an aluminum

    HRT SL (Super-Low) Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing an attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from the top of base to center of the ring. 30mm – Super Low: .820″ (20.8mm).

    Add to cart
    $109.00
    Quick View
  • HRT 30mm S-Low Alloy Steel

    0 out of 5
    HRT SL (Super-Low) Series Rings.  Providing an extremely low mounting

    HRT SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Super-Low: .820″ (20.8mm).

    Add to cart
    $114.00
    Quick View
  • HRT 30mm X-High 7075 Aluminum

    0 out of 5
    HRT Rings from TPS are precisely machined from aluminum billet,

    HRT Rings from TPS are precisely machined from aluminum billet, with tolerances held to .0002″ to provide maximum scope/ring contact. They hold scopes securely against heavy recoil. The four-screw cap lets you align the reticle; tighten the left side of the cap, then the right side without the scope rotating. The radiused edges and corners help prevent snagging while providing attractive appearance and the large clamp-nut lets you torque the rings to Weaver or Picatinny bases.

    Add to cart
    $119.00
    Quick View
  • ICBM 300

    0 out of 5
    Integrated Cantilever Base Mount (ICBM)

    Integrated Cantilever Base Mount (ICBM)

    Read more
    $199.00
    Quick View
  • REM L/A Rail [0-CANT] – Alloy Steel

    0 out of 5
    The XP One-piece scope rail, a standard in quality that

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 1215 alloy steel. The steel rail is finished in a matte black oxide finish to Mil-C-13924 standards. The XP bases are supplied with(4) four 6-48Torx® screws and wrench for reliable and trouble-free installation.

    Read more
    $89.00
    Quick View
  • Savage Accu-Trigger S/A Rail [0 MOA] Alloy Steel

    0 out of 5
    The XP One-piece scope rail, a standard in quality that

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 1215 alloy steel. The steel rail is finished in a matte black oxide finish to Mil-C-13924 standards.   The XP bases are supplied with(4) four 6-48Torx® screws and wrench for reliable and trouble-free installation.

    Add to cart
    $89.00
    Quick View
  • Savage Accu-Trigger S/A Rail [0 MOA] – 7075 Aluminum

    0 out of 5
    The XP One-piece scope rail, a standard in quality that

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 7075-T651 high-strength aluminum. The lightweight aluminum rail is finished in a matte black finish to Type III hard anodize to Mil-A-8625 standards. The XP bases are supplied with(4) four 6-48Torx® screws and wrench for reliable and trouble-free installation.

    Read more
    $75.00
    Quick View
  • Savage Accu-Trigger S/A Rail [20 MOA] – 7075 Aluminum

    0 out of 5
    The XP One-piece scope rail, a standard in quality that

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 7075-T651 high-strength aluminum. The lightweight aluminum rail is finished in a matte black finish to Type III hard anodize to Mil-A-8625 standards. The XP bases are supplied with(4) four 6-48Torx® screws and wrench for reliable and trouble-free installation.

    Add to cart
    $75.00
    Quick View
X