HRT 30mm S-Low 7075 Aluminum

S-Low

Showing 1–9 of 12 results

  • HRT 30mm S-Low 7075 Aluminum

    0 out of 5
    HRT SL (Super-Low) Series Rings, precisely machined from an aluminum

    HRT SL (Super-Low) Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing an attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from the top of base to center of the ring. 30mm – Super Low: .820″ (20.8mm).

    Add to cart
    $109.00
    Quick View
  • TSR 30mm S-Low 7075 Aluminum

    0 out of 5
    TSR SL (Super-Low) Series Rings, precisely machined from an aluminum

    TSR SL (Super-Low) Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Super Low: .820″ (20.8mm).

    Add to cart
    $109.00
    Quick View
  • TSR 30mm S-Low Alloy Steel

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Super-Low: .820″ (20.8mm).

    Add to cart
    $119.00
    Quick View
  • TSR 34mm S-Low 7075 Aluminum

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from a 7075 Aluminum alloybillet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: 7075 Aluminum Alloy, Type III Hard Anodize finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Super-Low: .950″ (24.1mm).

    Add to cart
    $145.00
    Quick View
  • TSR 34mm S-Low Alloy Steel

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.¬† Providing an extremely low mounting solution for those special applications¬† Precisely machined from a Alloy Steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: 7075 Aluminum Alloy, Type III Hard Anodize finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Super-Low: .950″ (24.1mm).

    Add to cart
    $154.00
    Quick View
  • TSR 35mm S-Low 7075 Aluminum

    0 out of 5
    TSR SL (Super-Low) Series Rings, precisely machined from an aluminum

    TSR SL (Super-Low) Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Super Low: .820″ (20.8mm).

    Add to cart
    $145.00
    Quick View
  • TSR 35mm S-Low Alloy Steel

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 35mm – Super-Low: .950″ (24.1mm).

    Add to cart
    $154.00
    Quick View
  • TSR-W 30mm S-Low 7075 Aluminum

    0 out of 5
    TSR SL (Super-Low) "W" Series Rings, precisely machined from an

    TSR SL (Super-Low) “W” Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Super-Low: .820″ (20.8mm).

    Add to cart
    $109.00
    Quick View
  • TSR-W 30mm S-Low Alloy Steel

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Super-Low: .820″ (20.8mm).

    Add to cart
    $119.00
    Quick View
X