TSR 34mm Low 7075 Aluminum

Low

Showing 10–18 of 23 results

  • TSR 34mm Low 7075 Aluminum

    0 out of 5
    TSR Series 34mm Rings, precisely machined from an aluminum billet,

    TSR Series 34mm Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Low: 1.025″ (26.04mm).

    Quick View
  • TSR 34mm Low Alloy Steel

    0 out of 5
    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil.

    Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases.

    SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Low: 1.025″ (26.04mm).

    Quick View
  • TSR 35mm Low 7075 Aluminum

    0 out of 5
    TSR Rings from TPS are precisely machined from alloy steel

    TSR Rings from TPS are precisely machined from alloy steel billet, with tolerances held to .0002″ to provide maximum scope/ring contact. They hold scopes securely against heavy recoil. The four-screw cap lets you align the reticle; tighten the left side of the cap, then the right side without the scope rotating. The radiused edges and corners help prevent snagging while providing attractive appearance and the large clamp-nut lets you torque the rings to Picatinny bases.

    Quick View
  • TSR 35mm Low Alloy Steel

    0 out of 5
    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 35mm – Low: 1.025″ (26.04mm).

    Quick View
  • TSR-W 1 Inch Low 7075 Aluminum

    0 out of 5
    TSR "W" Series Rings, precisely machined from an aluminum billet,

    TSR “W” Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 1″ – Low: .785″ (19.9mm).

    Quick View
  • TSR-W 1 Inch Low Alloy Steel

    0 out of 5
    TSR "W" Series Rings, precisely machined from an alloy steel

    TSR “W” Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 1″ – Low: .785″ (19.9mm).

    Quick View
  • TSR-W 26mm Low Alloy Steel

    0 out of 5
    TSR Weaver 26mm Alloy Steel Low Rings

    TSR Weaver 26mm Alloy Steel Low Rings

    Quick View
  • TSR-W 30mm Low 7075 Aluminum

    0 out of 5
    TSR "W" Series Rings, precisely machined from an aluminum billet,

    TSR “W” Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Low: .925″ (23.5mm).

    Quick View
  • TSR-W 30mm Low Alloy Steel

    0 out of 5
    TSR "W" Series Rings, precisely machined from an alloy steel

    TSR “W” Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Low: .925″ (23.5mm).

    Quick View
X