TSR 34mm High 7075 Aluminum

34mm

Showing 1–9 of 14 results

  • TSR 34mm High 7075 Aluminum

    0 out of 5
    TSR Series 34mm Rings, precisely machined from an aluminum billet,

    TSR Series 34mm Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing an attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from the top of base to center of the ring. 34mm – High: 1.435″ (36.44mm).

    Add to cart
    $149.00
    Quick View
  • TSR 34mm Low 7075 Aluminum

    0 out of 5
    TSR Series 34mm Rings, precisely machined from an aluminum billet,

    TSR Series 34mm Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Low: 1.025″ (26.04mm).

    Add to cart
    $139.00
    Quick View
  • TSR 34mm Low Alloy Steel

    0 out of 5
    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil.

    Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases.

    SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Low: 1.025″ (26.04mm).

    Add to cart
    $149.00
    Quick View
  • TSR 34mm Medium 7075 Aluminum

    0 out of 5
    TSR Series 34mm Rings, precisely machined from an aluminum billet,

    TSR Series 34mm Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Medium: 1.185″ (30.09mm).

    Add to cart
    $139.00
    Quick View
  • TSR 34mm Medium Alloy Steel

    0 out of 5

    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil.

    Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases.

    SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Medium: 1.185″

    Add to cart
    $149.00
    Quick View
  • TSR 34mm S-Low 7075 Aluminum

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from a 7075 Aluminum alloybillet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: 7075 Aluminum Alloy, Type III Hard Anodize finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Super-Low: .950″ (24.1mm).

    Add to cart
    $145.00
    Quick View
  • TSR 34mm S-Low Alloy Steel

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from a Alloy Steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: 7075 Aluminum Alloy, Type III Hard Anodize finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Super-Low: .950″ (24.1mm).

    Add to cart
    $154.00
    Quick View
  • TSR-W 34mm High 7075 Aluminum

    0 out of 5
    TSR-W Series 34mm Rings, precisely machined from an aluminum billet,

    TSR-W Series 34mm Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing an attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from the top of base to center of the ring. 34mm – High: 1.435″ (36.44mm).

    Add to cart
    $149.00 $129.99
    Quick View
  • TSR-W 34mm Low 7075 Aluminum

    0 out of 5
    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: Alloy 7075 Aluminum  finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Low: 1.025″ (26.04mm).

    Add to cart
    $139.00
    Quick View
X