HRT 30mm High 7075 Aluminum

30mm

Showing 1–9 of 27 results

  • HRT 30mm High 7075 Aluminum

    0 out of 5
    HRT Series Rings, precisely machined from an aluminum billet, with

    HRT Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – High: 1.225″ (31.1mm).

    Add to cart
    $99.00
    Quick View
  • HRT 30mm High Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – High: 1.225″ (31.1mm).

    Add to cart
    $113.00
    Quick View
  • HRT 30mm Low 7075 Aluminum

    0 out of 5
    HRT Series Rings, precisely machined from an aluminum billet, with

    HRT Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Low: .925″ (23.5mm).

    Add to cart
    $95.00
    Quick View
  • HRT 30mm Low Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Low: .925″ (23.5mm).

    Add to cart
    $109.00
    Quick View
  • HRT 30mm Medium 7075 Aluminum

    0 out of 5
    HRT Series Rings, precisely machined from an aluminum billet, with

    HRT Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Medium: 1.075″ (27.3mm).

    Add to cart
    $95.00
    Quick View
  • HRT 30mm Medium Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Medium: 1.075″ (27.3mm).

    Add to cart
    $109.00
    Quick View
  • HRT 30mm S-Low 7075 Aluminum

    0 out of 5
    HRT SL (Super-Low) Series Rings, precisely machined from an aluminum

    HRT SL (Super-Low) Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing an attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8″ (15.8mm) wide. Height measured from the top of base to center of the ring. 30mm – Super Low: .820″ (20.8mm).

    Add to cart
    $109.00
    Quick View
  • HRT 30mm S-Low Alloy Steel

    0 out of 5
    HRT SL (Super-Low) Series Rings.  Providing an extremely low mounting

    HRT SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Super-Low: .820″ (20.8mm).

    Add to cart
    $114.00
    Quick View
  • HRT 30mm X-High 7075 Aluminum

    0 out of 5
    HRT Rings from TPS are precisely machined from aluminum billet,

    HRT Rings from TPS are precisely machined from aluminum billet, with tolerances held to .0002″ to provide maximum scope/ring contact. They hold scopes securely against heavy recoil. The four-screw cap lets you align the reticle; tighten the left side of the cap, then the right side without the scope rotating. The radiused edges and corners help prevent snagging while providing attractive appearance and the large clamp-nut lets you torque the rings to Weaver or Picatinny bases.

    Add to cart
    $119.00
    Quick View
X