TSR-W 34mm S-Low Alloy Steel

1215 Alloy Steel Billet

Showing 37–45 of 47 results

  • TSR-W 34mm S-Low Alloy Steel

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Super-Low: .950″ (24.1mm).

    Add to cart
    $154.00
    Quick View
  • TSR-W 35mm Low Alloy Steel

    0 out of 5
    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) or Weaver-style bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 35mm – Low: 1.025″ (26.04mm).

    Add to cart
    $149.00
    Quick View
  • TSR-W 35mm Medium Alloy Steel

    0 out of 5
    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) or Weaver-style bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 35mm – Med: 1.185″ (29.8mm).

    Add to cart
    $149.00
    Quick View
  • TSR-W 35mm S-Low Alloy Steel

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 35mm – Super-Low: .950″ (24.1mm).

    Add to cart
    $154.00
    Quick View
  • XP Rem 700 L/A Rail – 20 MOA (8-40 Screws) – Alloy Steel

    0 out of 5

    *Custom Modification Product*

    The XP One-piece scope rail, a standard in

    *Custom Modification Product*

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 1215 alloy steel. The steel rail is finished in a matte black oxide finish to Mil-C-13924 standards. The XP bases are supplied with(4) four 8-40 Torx® screws and wrench for reliable and trouble-free installation.  Please note this is for custom modified 8-40 screws, this rail is built for custom rifle builds for those receivers that have been modified from the factory 6-48 screws.

    Read more
    $106.00
    Quick View
  • XP Rem 700 L/A Rail [20-CANT] – Alloy Steel

    0 out of 5
    The XP One-piece scope rail, a standard in quality that

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 1215 alloy steel. The steel rail is finished in a matte black oxide finish to Mil-C-13924 standards. The XP bases are supplied with(4) four 6-48Torx® screws and wrench for reliable and trouble-free installation.

    Add to cart
    $89.00
    Quick View
  • XP Rem 700 L/A Rail 0 MOA (8-40 Screws) – Alloy Steel

    0 out of 5
    Remington L/A 0 MOA Rail (8-40 Screws) - Alloy Steel

    Remington L/A 0 MOA Rail (8-40 Screws) – Alloy Steel

    Read more
    $106.00
    Quick View
  • XP Rem 700 S/A Rail – 0 MOA (8-40 Screws) – Alloy Steel

    0 out of 5
    *Custom Modification Product* The XP One-piece scope rail, a standard in

    *Custom Modification Product*

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 1215 alloy steel. The steel rail is finished in a matte black oxide finish to Mil-C-13924 standards. The XP bases are supplied with(4) four 8-40 Torx® screws and wrench for reliable and trouble-free installation.  Please note this is for custom modified 8-40 screws, this rail is built for custom rifle builds for those receivers that have been modified from the factory 6-48 screws.

    Read more
    $106.00
    Quick View
  • XP Rem 700 S/A Rail – 20 MOA (8-40 Screws) – Alloy Steel

    0 out of 5

    *Custom Modification Product*

    The XP One-piece scope rail, a standard in

    *Custom Modification Product*

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 1215 alloy steel. The steel rail is finished in a matte black oxide finish to Mil-C-13924 standards. The XP bases are supplied with(4) four 8-40 Torx® screws and wrench for reliable and trouble-free installation.  Please note this is for custom modified 8-40 screws, this rail is built for custom rifle builds for those receivers that have been modified from the factory 6-48 screws.

    Add to cart
    $106.00
    Quick View
X