TSR 34mm Low Alloy Steel

1215 Alloy Steel Billet

Showing 19–27 of 47 results

  • TSR 34mm Low Alloy Steel

    0 out of 5
    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil.

    Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases.

    SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Low: 1.025″ (26.04mm).

    Add to cart
    $149.00
    Quick View
  • TSR 34mm Medium Alloy Steel

    0 out of 5

    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil.

    Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases.

    SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Medium: 1.185″

    Add to cart
    $149.00
    Quick View
  • TSR 34mm S-Low Alloy Steel

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.¬† Providing an extremely low mounting solution for those special applications¬† Precisely machined from a Alloy Steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: 7075 Aluminum Alloy, Type III Hard Anodize finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 34mm – Super-Low: .950″ (24.1mm).

    Add to cart
    $154.00
    Quick View
  • TSR 35mm Low Alloy Steel

    0 out of 5
    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 35mm – Low: 1.025″ (26.04mm).

    Add to cart
    $149.00
    Quick View
  • TSR 35mm Medium Alloy Steel

    5.00 out of 5
    TSR Rings from TPS are precisely machined from alloy steel

    TSR Rings from TPS are precisely machined from alloy steel billet, with tolerances held to .0002″ to provide maximum scope/ring contact. They hold scopes securely against heavy recoil. The four-screw cap lets you align the reticle; tighten the left side of the cap, then the right side without the scope rotating. The radiused edges and corners help prevent snagging while providing attractive appearance and the large clamp-nut lets you torque the rings to Picatinny bases.

    Add to cart
    $149.00
    Quick View
  • TSR 35mm S-Low Alloy Steel

    0 out of 5
    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting

    TSR SL (Super-Low) Series Rings.  Providing an extremely low mounting solution for those special applications  Precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 35mm – Super-Low: .950″ (24.1mm).

    Add to cart
    $154.00
    Quick View
  • TSR-W 1 Inch High Alloy Steel

    0 out of 5
    TSR "W" Series Rings, precisely machined from an alloy steel

    TSR “W” Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 1″ – High: 1.185″ (30mm).

    Add to cart
    $103.00
    Quick View
  • TSR-W 1 Inch Low Alloy Steel

    0 out of 5
    TSR "W" Series Rings, precisely machined from an alloy steel

    TSR “W” Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 1″ – Low: .785″ (19.9mm).

    Add to cart
    $99.00
    Quick View
  • TSR-W 1 Inch Mediuim Alloy Steel

    0 out of 5
    TSR "W" Series Rings, precisely machined from an alloy steel

    TSR “W” Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 1″ – Medium: .985″ (25mm).

    Add to cart
    $99.00
    Quick View
X