HRT 1 Inch High Alloy Steel

1215 Alloy Steel Billet

Showing 1–9 of 47 results

  • HRT 1 Inch High Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 1″ – High: 1.185″ (30mm).

    Add to cart
    $103.00
    Quick View
  • HRT 1 Inch Low Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 1″ – Low: .785″ (19.9mm).

    Add to cart
    $99.00
    Quick View
  • HRT 1 Inch Medium Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 1″ – Medium: .985″ (25mm).

    Add to cart
    $99.00
    Quick View
  • HRT 30mm High Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – High: 1.225″ (31.1mm).

    Add to cart
    $113.00
    Quick View
  • HRT 30mm Low Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Low: .925″ (23.5mm).

    Add to cart
    $109.00
    Quick View
  • HRT 30mm Medium Alloy Steel

    0 out of 5
    HRT Series Rings, precisely machined from an alloy steel billet,

    HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 30mm – Medium: 1.075″ (27.3mm).

    Add to cart
    Browse Wishlist
    $109.00
    Quick View
  • Savage Accu-Trigger S/A Rail [0 MOA] Alloy Steel

    0 out of 5
    The XP One-piece scope rail, a standard in quality that

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 1215 alloy steel. The steel rail is finished in a matte black oxide finish to Mil-C-13924 standards.   The XP bases are supplied with(4) four 6-48Torx® screws and wrench for reliable and trouble-free installation.

    Add to cart
    $89.00
    Quick View
  • Savage Accu-Trigger S/A Rail [20 MOA] – Alloy Steel

    0 out of 5
    The XP One-piece scope rail, a standard in quality that

    The XP One-piece scope rail, a standard in quality that only Tactical Precision Systems can deliver.The XP scope rail features a integral recoil shoulder to eliminate the base from moving under heavy recoil. It has a full length Mil-STD 1913 (Picatinny) rail, built to military specifications, as well as being fully compatible with Weaver-style rings. The entire scope rail is CNC machined, with the same standards and quality as all of the products from TPS.The scope rail is machined from a solid billet of 1215 alloy steel. The steel rail is finished in a matte black oxide finish to Mil-C-13924 standards.   The XP bases are supplied with(4) four 6-48Torx® screws and wrench for reliable and trouble-free installation.

    Add to cart
    $89.00
    Quick View
  • TSR 1 Inch Low Alloy Steel

    0 out of 5
    TSR Series Rings, precisely machined from an alloy steel billet,

    TSR Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002″, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8″ (15.8mm) wide. Height measured from top of base to center of ring. 1″ – Low: .785″ (19.9mm).

    Add to cart
    $99.00
    Quick View
X